logo

Environmental Compliance, Training & Consulting, LLC

Guiding Through The Regulatory Maze

 
 

OSHA Courses

Permit-Required Confined Space Entry

This one-day course is required training for any employee who will perform work within a permit-required confined space entry. Training content will include:

  • Identification of confined spaces

  • Differences between confined spaces and permit-required confined spaces

  • Provisions of the OSHA Permit-required Confined Space Regulation Duties and responsibilities of Authorized Entrant, Attendant, and Supervisor

  • Proper safe work practices and procedures for safe entry into a permit required confined space

  • Air monitoring requirements for entry into a confined space, including hands-on practice

  • Proper documentation of confined space entry: the Confined Space Entry Permit

  • Overview of confined space rescue procedures

  • Hands-on practice in confined space entry and non-entry confined space rescues

This training meets the OSHA Permit-required Confined Space Standard (29 CFR 1910.146) and includes non-entry rescue requirements.

Personal Protective Equipment

This 2-hour training is designed to meet the requirements of the OSHA Personal Protective Equipment Standards, 29 CFR 1910 Subpart I.  Training topics include types of required PPE; OSHA regulations PPE; capabilities and limitations of PPE; how to use, fit, and adjust PPE; and PPE cleaning, maintenance, storage, useful life and disposal guidelines.

Lockout/Tagout Training

This training provides instruction in the proper practices and procedures used to power down/shut down equipment, isolate it from its energy source(s), and prevent the release of potentially hazardous energy while maintenance and servicing activities are performed.

This training meets OSHA’s Lockout/Tagout Standard (29 CFR 1910.147).

Respiratory Protection

The objective of this training is to provide mandatory training that defines the need for respiratory protection equipment, as well as proper selection, use, and care of employee respiratory protection. Topics include terminology, OSHA standards, National Institute for Occupational Safety and Health (NIOSH) certification, and medical evaluation requirements. The training meets the requirements set forth in the OSHA Respiratory Protection Standard (1910.134) and may include respirator fit testing, if required.

Hazard Communication (HAZCOM)

This course focuses on OSHA's Hazard Communication Standard, 29 CFR 1910.1200, and is intended for employees who work with or have contact with hazardous chemicals. Information presented includes:

  • Routes of exposure and health effects of hazardous chemicals

  • Material Safety Data Sheets (MSDS)

  • Chemical identification systems

  • Labeling and the importance of a written Hazard Communication program

Lead – Based Paint Courses

Lead paint was used for years on residential properties, until the Consumer Product Safety Commission banned its use after 1978.  Unfortunately, the paint is still present in many homes and needs to be maintained or removed correctly; otherwise, the paint could become a health hazard.

There are many training courses available for dealing with lead-based paint in a safe and manner.  These courses are designed to help people who want to become lead paint workers, supervisors, inspectors, and risk assessors. 

Each of the following positions has a purpose in dealing with lead-based paint:

Lead Paint Abatement Worker Training

This two-day course is designed for those who work directly on Lead-Based Paint abatement projects.  It is required by Maryland and all states for local accreditation and licensing as a lead-based paint abatement worker; or for Maryland’s Maintenance and Repainting discipline, which is part of the Maryland Lead Risk Reduction Program.  The course focuses on health effects, safe work practices, medical monitoring, regulatory requirements, personal protection, and decontamination.  Anyone with a passing score of 70% or better on the final examination will qualify.

Lead Paint Abatement Supervisor Training

This four-day course is designed for those who work directly on Lead-Based Paint abatement projects.  It is required by Maryland and all states for accreditation and licensing as a lead-based paint abatement supervisor.  It is also recommended in Maryland as part of the Maryland Lead Risk Reduction Program (refer to the Maintenance & Repainting Supervisor below).  The course focuses on health effects, safe work practices, medical monitoring, regulatory requirements, personal protection, and decontamination of lead paint projects.  A lead paint removal and demolition supervisor must have at least 2 years of experience in related construction trades, including but not limited to lead paint abatement, carpentry, painting, or demolition.

Lead Paint Inspector Technician Training

This three-day EPA-accredited course is designed for those students who want to perform lead paint inspections, which are done to determine the presence or absence of lead-based paint on residential and commercial properties.  Learn how to use an x-ray fluorescence analyzer, conduct paint chip sampling, and perform dust wipe testing for lead in compliance with EPA, HUD and Maryland requirements.  The course will also include methods to properly complete associated inspection reports and protocols; and includes information on the health effects of lead exposure, as well as techniques used in lead hazard control.  To complete the accreditation process, an application (which will be provided in the class) and a protocol must be submitted to the Maryland Department of the Environment along with a fee of $125 upon satisfactory completion of the course.

Lead Paint Risk Assessor Training

This 2-day course will present the HUD - devised methods for Lead Risk Assessment Screen and full Risk Assessment. These are methods of onsite investigations of a residential dwelling to discover lead-based paint hazards. The course content includes topics such as Lead risk assessment protocol, collecting background information on the property and occupants, visual inspection and assessment, and Hazard control options.  The course also includes hands-on activities including sampling, interpretation of sampling results and assessment activities.

Only Inspector Technicians are eligible to take the Risk Assessor course.

Lead Paint Maintenance and Repainting Supervisor Training

This two-day course is designed for those who do work in rental properties in Maryland in order to bring those properties into compliance with the Maryland Lead Risk Reduction Standard.  The course is also designed for home improvement contractors who do work involving limited disturbance of lead-based paint while working in rental properties.  Topics that will be discussed include information regarding the health effects of exposure to lead, how to protect against those exposures; the techniques for safely working around lead-based paint; clean-up procedures; and OSHA-related health and safety programs.  The course includes the Maryland rental property regulations in detail, along with other regulations that may impact the home improvement community.  Property owners who wish to either do work that disturbs lead-based paint or to supervise the required procedures for compliance with related Maryland law, must be accredited to this level of supervision.  Upon completion, an application (which will be provided in the class) must be submitted to the Maryland Department of the Environment with a fee of $125 to complete the accreditation process.

Lead Paint Visual Inspector Training

This two-day course is designed for those students who want to perform lead paint inspections, which are done to verify satisfactory completion of work required in rental properties under the Maryland Lead Risk Reduction Standard.  Learn how to perform dust wipe testing for lead, as well as a visual inspection for compliance with the Full/Modified Risk Reduction Standard.  The course focuses on how to properly complete associated inspection reports and protocols; and includes information on the health effects of lead exposure, as well as techniques used in lead hazard control.  The student can also qualify to be a HUD Sampling Technician, which allows him or her to perform visual assessments and dust wipe inspections in HUD-owned and Section 8 HUD assisted rental units.  To complete the accreditation process, an application (which will be provided in the class) must be submitted to the Maryland Department of the Environment along with a fee of $125 upon satisfactory completion of the course.